How To Get Water Out Of A Charging Port

Published : December 20, 2022

If your phone has gotten water in the charging port, there are a few things you can do to try and get it out. First, try using a vacuum cleaner with the nozzle attachment to suck out any water that may be in there.

If that doesn’t work, you can try using a cotton swab to soak up any water and then gently wiping it away. You can also blow into the port to try and remove any water droplets.

Can I Charge My Phone When the Port Is Still Wet?

If your phone’s port is still wet, you may be able to charge it. However, you should take some precautions first.

If the port is still wet, charging your phone could potentially damage it. The moisture can cause corrosion, which can lead to problems with your phone’s charging port.

To charge your phone safely, first make sure that the port is dry. If the port is still wet, try using a hairdryer on a low setting to dry it out. Once the port is dry, you can plug in your charger and charge your phone as usual.

First Aids to Save Your Phone From Water

It is estimated that one in three Americans has their phone within arm’s reach 24/7. So, it is no surprise that accidents happen and phones end up taking a swim. Whether you’ve dropped your phone in the toilet or it fell out of your pocket into the pool, there are first aid steps you can take to try to salvage your device.

First, do not panic! It is important to stay calm so you can think clearly and act quickly. Second, turn off your phone as soon as possible. This will help prevent any further damage from occurring. Third, remove your phone’s case and any other accessories. Fourth, use a vacuum cleaner with the hose attachment to suck out any water from the ports and openings. Fifth, blot the exterior of your phone with a towel or cloth to remove any moisture.

How to Get Water Out of Charging Port on Android/iPhone

Remove Moisture

First, you have to remove the water. You can accomplish this by taking a small bit of soft cotton cloth. Now, gently try to clean the port by pressing it inward with the cloth. You can let your phone reach complete dryness on its own for around a half hour or longer. Be sure to not press too hard as it can push the water into the port.

Leave It for Evaporation

One highly effective strategy is to let the phone air dry naturally. Frequently, the water inside the port will evaporate within a couple of hours. While doing this, make sure your phone is upright and keep it in a well-ventilated area.

Use a Wireless Charger

If your USB charger doesn’t charge despite following these steps, try using a portable USB charger. However, we advise making sure the phone and accessories are clean and dry prior to charging.

Contact Customer Care

If the aforementioned strategies did not fundamentally fix the port, you can contact customer service for assistance. If you utilize Samsung, you can contact their Customer Service page.

If you or your phone have an Apple, you can reach out to the Apple Support page. You may also visit a regional repair center if your phone is not turning on.

Myths of Drying a Phone: Does It Really Work?

Sun Exposure

It’s typical to think that it’s a good idea to let your phone absorb sunlight. However, sun exposure can damage your phone’s hardware and lead to it overheating.

The batteries in your phone might also be damaged by overheating, and the tiny board on the phone itself might also experience damage. Finally, your phone’s screen can be afflicted with the heat.

Dry Rice

Before placing your phone inside a dry cup of rice overnight, the old way was to dry it. However, it doesn’t always work. Tiny dust particles in the dry rice or even the rice grains can get inside your phone charger. Instead, try other methods or place silica gel packets near the charging port.

Cotton Swab

Using cotton swabs to absorb excess moisture may have seemed desirable, but it not. Rubbing the swab in the port can cause the cotton dust particles to move further in. The swab can also push the moisture farther in.

Paper Towel

If you use a paper towel inside your wet charging port, the towel will also get wet, and it can get up into the port. Using this method will be challenging to clean up out wet tissue particles from within the port. Thus, it isn’t a good idea to use this tactic.

Vacuum Hose

By using a vacuum pump, it’s possible to get some water out, but the air pressure may affect the components in your cell phone. Additionally, a vacuum pump cannot remove all other liquid dirt access the jack.

Hair Dryer

The hair dryer blows air straight into the charger outlet on your device. This will draw more air inside, worsening the problem. Instead, use the device at the lowest speed and in cold setting.

Letting Your Phone Sit

If you feel unsure, you might feel like letting your smartphone remain in some cases, like for a couple of days. However, this will cause chronic corrosion to your phone’s components, which may take weeks to develop symptoms.

Swinging or Shaking the Phone

Shaking your phone will not remove the water from the charging port. Instead, it might push the water further inside. This can worsen the harm, and it may take far longer to manually dry the phone.

Toothpick

Any sharp objects, such as a toothpick, can cause damage to the interior of the charging port. Therefore, it’s best to avoid using a toothpick even if you wrap cotton around it.

How to Know if My Phone Is Completely Dry?

If your phone has been exposed to water, you may be wondering if it is completely dry. There are a few things you can do to check if your phone is dry.

First, check the outside of the phone for any moisture. If the phone is wet, it is likely that there is still water inside of it.

Next, check for any condensation on the inside of the phone. To do this, remove the back cover and battery from the phone. If there is condensation on either of these components, your phone is not completely dry.

Finally, try turning on the phone. If the phone powers on, it is likely that all of the water has evaporated from inside of it. However, if the phone does not power on, there may still be water inside of it.

How to Fix False Alert in iPhone/Android Liquid Detection?

First, try restarting your phone. This can sometimes clear out any glitches that might be causing the problem. If that doesn’t work, try wiping the cache partition on your phone. This will delete any temporary files that could be causing the issue.

If those two solutions don’t work, you may need to replace the water-resistant coating on your phone. This is a more involved fix, but it’s still relatively easy to do. You can buy replacement coatings online or at most electronics stores.