Category : Tech

How to Fix a Sagging Drawer Bottom

Published : December 18, 2022

Do you have a drawer that is slowly sinking and pulling apart at the bottom? If so, there are several things you can do to try and fix the problem. You may need to add more support to the drawer or install a new drawer bottom.
This article will guide you to get the exact solution. So stick with us till the end. you will find what you need soon. enjoy.

Steps to follow:

Method 1

Replace the thin plywood with a thicker one

People rate this repair method as the most challenging of the 3. Even so, fixing broken or cracked drawer bottoms is quite a simple process. Since it’s impossible to evade replacement, it is wise to opt for this method whenever your drawer bottom is faulty.

1 Disassemble and remove the bottom:

The very first step in this process is separating the bottom from the drawer. This will require you to disassemble the entire drawer. If you are the one who assembled the furniture recently, then disassembling it means undo this process.

Take a step by step approach, dismantling the disassemblers and putting the part apart a single drawer at a time. If you cannot figure it out, now may be a good time to call an expert.

Create a new bottom:

You can buy a new bottom panel from the local hardware store. Choose plywood that’s thicker than the original. Sheet timber, such as that, is an excellent size. Lay down the plywood. Set the original bottom into place and race it out on the plywood. Then cut the plywood to create the replacement bottom.

Use Sandpaper to smoothen the surface

To avoid with splinters in your clothing or whatever items you ll put into the drawer, it s recommended to smooth out the plywood s surface using sandpaper.

You can find this online, for instance, the 3M General Purpose Sandpaper Sheets. This sandpaper is easily used and is particularly great for DIY projects, including woodworking, and is also appropriate to vent humidity.

Next, Widen the Dadoes

Narrowing your dadoes should be done carefully and meticulously to make sure you don’t over cut the grooves. Use a table saw to enlarge them. Make the dadoes big enough for the new underside without being too tight. Do it for the side pieces, the back, and the front drawer.

Reassemble the drawer:

Now all the parts of your drawer are reassembled, you can put it back together. It now fits snugly into the dado grooves. If you press down on the plywood bottom, you can feel how solid your refurbished drawer is now. Now you can confidently use your drawer without worrying about it falling apart.


What can I use for drawer bottoms?

There are a few different materials that can be used for drawer bottoms. The most common is thin plywood, but other materials such as medium-density fiberboard (MDF) and particle board can also be used.

If you are using plywood, it is important to select the right type. The most common types of plywood are birch and oak. Birch is the better choice because it is more stable and will not expand or contract as much as oak.
Another option for drawer bottoms is to use a solid piece of wood. This option can be more expensive, but it will last longer than plywood.
Finally, if you are looking for a cheaper option, you can use a sheet of vinyl or linoleum.

Can you use a hardboard for drawer bottoms?

There is a lot of debate over whether or not hardboard can be used for drawer bottoms. Some people say that it is an ideal material because it is durable and inexpensive. Others claim that it does not hold up well over time and can warp or chip.

I decided to test the theory myself by making a few drawers out of hardboard and then putting them through some rigorous use. I dragged them across the floor, filled them with heavy items, and even tried to saw through them. After several months of testing, I found that hardboard can definitely hold up as a drawer bottom – as long as you are careful with it.

If you are looking for an inexpensive option that will still stand up to some wear and tear, then hardboard may be the right choice for you.

Conclusion: In conclusion, there are a few ways to fix a sagging drawer bottom. By using either a piece of wood or some foam, it is easy to make your drawer functional again. Just be sure to measure the space correctly and use the right materials for the job. With a slightf effort, you can have your drawer bottom back in place and your drawer looking good as new.