Verizon comes with a unique status light. It changes over time to show the status of the network.
Now, the question about the light is: What does the different color mean? In this article, we will cover one specific thing: that is the blue color blinking.
First of all, why is it blinking solid blue?
There are several potential reasons why your Verizon router might be blinking blue. One reason could be that the router is not getting a power supply, so it’s constantly restarting
Another possibility is: there is a problem with the ethernet cable, or with the internet service itself. If you’ve recently installed a new modem or updated your firmware, that could also be causing the blue light to blink.
However, one of the common reasons is WPS pairing mood is not working properly.
Let’s see how can you fix the problem here.
How To Fix The Verizon Fios Router Blinking Blue?
Move The Devices Closer
First, try moving the devices closer together. If they’re too far apart, the signal may not be strong enough to reach both devices. Better,try to move it closer to the router, see if that fixes the problem.
If that doesn’t work, try restarting the router. Sometimes it takes a quick restart to fix a problem like this.
PowerCycle Your Verizon Fios Router
Here’s how to power cycle your Verizon Fios router:
- Unplug the router power cable from the wall.
- Wait for about 30 seconds.
- Plug the power cable into the wall.
- Wait for about 60 seconds for the router to boot up completely.
- Try using the internet again.
PowerCycle Your WPSEnabled Device
The process is simple. You need to reset the WPS mood once again. First, disconnect the device from all power sources.
Next, switch it back by attaching all the cables. As soon as, it reboots, start to pair the devices. This will work.
Reset The Verizon Fios Router To Factory Defaults
One of the easiest solutions is: reset the router to factory defaults. You can do it by following the steps.
First ,remove the plug from the power cord of router.
Second, wait 30 seconds and then plug the power cord back in.
Third, press and hold the reset button on the back of the router for 10 seconds.
Fourth, release the button and wait for the router to start up. The blue light will stop blinking and stay solid when it’s done.
When you are done with all the aforementioned tricks. And still, you are not getting any solution! I recommend you to contact the customer support team. They will send an engineer to fix the issue. So far their customer service is too good.
How To Connect A WPS-Enabled Device Using WPS?
WPS (Wi-Fi Protected Setup) is a feature on routers and access points. It allows users to connect the devices to the network without having to remember passwords or enter them through a web interface.
Now, how To Connect A WPS Enabled Device Using WPS? Here is the solution.
For routers without a physical WPS button, you can usually find the PIN code in the router’s settings. Open the web browser and type in the IP address of your router.
Once you’re there, look for the section with the heading “WPS Push Button Setup” or “WPS PIN Entry.” If you don’t see either of those headings, your router doesn’t support WPS. In that case, you’ll have to use the traditional password-based connection method.
What is the best router to use with Verizon FIOS?
There is no one “best” router to use with Verizon FIOS, as different people will have different needs and preferences. However, some routers are better suited for use with FIOS than others.
If you need a lot of range and speed, for example, a dual-band AC router like the Netgear Nighthawk R7000 might be a good option.
If you’re mainly looking to stream video content, a router with built-in Quality of Service (QoS) like the Asus RT-AC68U could be a good choice, as it will help to ensure that your videos don’t buffer. Ultimately, the best router to use with Verizon FIOS depends on your specific needs and preferences.
Can I use routers with Verizon FIOS?
When it comes to choosing a home router, there are a few things you need to take into account. One of the factors are the type of internet service you have. If you have Verizon FIOS, you may be wondering if you can use a router with your service. The answer is yes – you can use a router with Verizon FIOS.
However, not all routers are compatible with FIOS. In order to ensure that you choose a router that is compatible with your service, you’ll check the specifications of your particular router and Verizon’s website to see if it is supported.
In conclusion, the Verizon router is blinking blue because there is a problem with the network or the router itself. There are few things that you can do to try to fix the problem, including restarting the router and checking your connection. If those steps don’t work, you may need to call Verizon for help.